|
Author:
Dennis G Kelley PE
|
2005-11-17 |
|
| |
|
|
| |
We are on a NT network at our office. I have been using driven 1.2 for a few years now. Last week we got a warning when we tried to open the program. (protective). Now, we do not have a warning - simply the program will not come up.
We tried another computer in the office, downloaded the program off of the internet and used the program for the weekend.
On monday, we tried to open the program on the new computer and we have the same problem- it simply will not come up
anybody out there with a similar problem?
|
|
| |
|
|
Follow-up:
| |
Author:
Serg
|
2005-12-27 |
|
| |
|
|
| |
This might happend because the program was
written as 16 bit program. Windows 2000 or above
don't let you run this kind of program, unless you
patch the OS. There is a patch out for it.
Hope this help..
|
|
| |
|
|
Follow-up:
| |
Author:
T. Stevens
|
2006-01-08 |
|
| |
|
|
| |
Try using UniPile instead. It can do anything Driven can do and then some, including loading test simulation and settlement analysis. You can obtain a full operation trial copy from UniSoft Ltd. [<info@UnisoftLtd.com>;].
T. Stevens, UniSoft Ltd.
|
|
| |
|
|
Return
to subject 'Piling'
|
Follow-ups:
|
Subject:
DRIVEN 1.2 